The intelligent liquid silica gel feeding system is adopted in the liquid silica gel feeding machine instead of manual operation, which greatly saves the labor cost. The liquid silica gel feeder has the advantages of low noise, no odor, less heat dissipation, low curing temperature and improved operating environment. The liquid silica gel feeding machine can inject glue accurately and reduce the waste of glue. The vulcanization time of liquid silica gel feeder is about three times faster, which improves the production efficiency. The liquid silica gel feeder is more energy-saving and environmental friendly, with low curing temperature, which avoids the exposure of rubber and dust during vacuum preparation.
Manufacturer of liquid silica gel feeder
Powerful hydraulic feeding system for silicone feeding. The central driving device is used to act on the material pump, thus avoiding the side force which will lead to wear increase during mechanical connection. By changing the color pump, the color can be changed simply, quickly and cleanly. The colorant device is directly connected to the mixing module at the front end of the feeder. It can move up and down to eat, and it's good at maintaining pressure. Since pump a and pump B are hydraulically connected and controlled synchronously, the feeding system is reliable and accurate.
The liquid silica gel feeder has a synchronous single pump with one-way valve, and the metering cylinder system is mainly used in combination with the single pump. The operating system includes three aspects: controlling the operation of the computer version, using the electrical control system and using the hydraulic system. Everyone should do a good job in the injection process, filling action, injection pressure, injection speed, injection form selection, temperature monitoring of each section of the filling cylinder, and adjustment of injection pressure and back pressure.
When the liquid silica gel feeder is used, it is necessary to add granular or powdery plastic into the barrel, and the plastic melts according to the rotation of the screw and the heating of the outer wall of the barrel. Then the machine completes the mold closing, and the injection seat moves forward to make the nozzle close to the gate of the mold. Then, the pressure oil is injected into the injection cylinder to push the screw forward, and the melt is introduced into the closed mold at a lower temperature, higher pressure and faster speed. After a certain period of time and pressure holding (called pressure holding) and cooling, the mold is opened and the product is removed (pressure holding means avoiding reverse flow of melt in the cavity, replenishing the material into the cavity, and ensuring that the product has certain density and dimensional tolerances).
The above explanation is the functional advantages of the liquid silica gel feeder. I hope it can help you after reading it. If you want to know more about the liquid silica gel feeder, please contact customer service online or call our service hotline (top right corner of the website) for consultation. We will provide you with high-quality service!
